• Product selection guide

Cable Version

Filter
1
Hits: 23
JUMO railTEMP - Wheelset temperature probe

JUMO railTEMP

Wheelset temperature probe Basic type: 902195
JUMO railTEMP has a qualified measuring insert especially developed for railway applications with up to 2 sensing elements and can be equipped with different sensors. The firmly attached connection line is available with a variety of different connections or high-quality connectors. Halogen-free materials and cable protection ensure maximum safety in rail transport as well as reliable measurement results.
  • Temp.: -50 to +200 °C
  • Protection type: IP68 / IP69
  • Certified acc. to DIN EN 50155/61373
JUMO FOODtemp - Food insertion RTD temperature probe

JUMO FOODtemp

Food insertion RTD temperature probe Basic type: 902350
Due to their special construction, these robust, steam-tight food insertion RTD temperature probes are especially suited to cooking, boiling, and baking processes in all food processing and food preservation applications. Further application areas are autoclaves and sterilizers.
  • Temp.: -50 to +260 °C
  • Pt100 temperature sensor
  • Two-wire/three-wire circuit as a standard feature
Level and temperature probes - For commercial vehicles

Level and temperature probes

For commercial vehicles Basic type: 902880
This product is for monitoring the level and temperature of engine oil and gearbox oil as well as for supporting vehicle diagnosis in modern commercial vehicles, construction machines, and agricultural machines.
  • Measuring range: 50 mm or 62 mm
  • Medium temperature: -40 to +140 °C
  • Optional temperature sensor
Mineral-insulated RTD temperature probe - With bare connection wires according to DIN EN 60751

Mineral-insulated RTD temperature probe

With bare connection wires according to DIN EN 60751 Basic type: 902210
Mineral-insulated RTD temperature probes are used in chemical plants, power plants, pipelines, and in engine manufacturing due to their flexibility and easy mounting.
  • Temp.: -50 (-200) to +600 °C
  • Temperature sensor: Pt100 or Pt1000
  • Response time: t0.5 from 0.7 s
Screw-in melt RTD temperature probe - For application in the plastics industry

Screw-in melt RTD temperature probe

For application in the plastics industry Basic type: 902090
Screw-in melt RTD temperature probes are predominantly used for temperature measurement in the plastics industry and acquiring melt temperatures. Sharp or flat probe tips ensure optimum temperature acquisition depending on the requirements.
  • Temp.: -50 to +400 °C
  • Pt100 temperature sensor
  • Two-wire, three-wire, or four-wire
Push-in RTD temperature probe - With bayonet fastener

Push-in RTD temperature probe

With bayonet fastener Basic type: 902190
The special shape of the probe tip makes these temperature probes suitable for use in flat and pointed drilled holes. They are predominantly used for temperature measurements in solid bodies, friction bearings, and tools (e.g. in the plastics industry).
  • Temp.: -50 to +400 °C
  • Insertion length 20 to 190 mm
  • Pt100 temperature sensors
Push-in RTD temperature probe - With connecting cable for solar thermal systems

Push-in RTD temperature probe

With connecting cable for solar thermal systems Basic type: 902153
The push-in RTD temperature probes have been especially developed for the requirements of temperature measurement in solar thermal plants. They are used in collectors and accumulators of solar thermal plants.
  • Temp.: -50 to +260 °C
  • Pt1000 temperature sensor
  • Response time: 0.4 m/s
Mineral-insulated RTD temperature probe - With LEMO coupling according to DIN EN 6075

Mineral-insulated RTD temperature probe

With LEMO coupling according to DIN EN 6075 Basic type: 902240
Mineral-insulated RTD temperature probes are used in chemical plants, power plants, pipelines, and in engine manufacturing due to their flexibility and easy mounting.
  • Temp.: -50 (-200) to +600 °C
  • Temperature sensor: Pt100 or Pt1000
  • Response time: t0.5 from 0.7 s
Mineral-insulated RTD temperature probe - With connecting cable according to DIN EN 60751

Mineral-insulated RTD temperature probe

With connecting cable according to DIN EN 60751 Basic type: 902250
Mineral-insulated RTD temperature probes are used in chemical plants, power plants, pipelines, and in engine manufacturing due to their flexibility and easy mounting.
  • Temp.: -50 (-200) to +600 °C
  • Temperature sensor: Pt100 or Pt1000
  • Response time: t0.5 from 0.7 s
JUMO STEAMtemp - Push-in RTD temperature probe (steam-tight)

JUMO STEAMtemp

Push-in RTD temperature probe (steam-tight) Basic type: 902830
Push-in RTD temperature probes are predominantly used for temperature measurement in sterilizers. Their special design permits applications in a pressurized atmosphere containing steam. Additional application areas include apparatus and laboratory engineering.
  • Pt100 temperature sensor
  • Temp.: -70 to +200 °C
  • Protection type IP69
Test equipment for temperature and its traceability - Pt100 precision RTD temperature probe

Test equipment for temperature and its traceability

Pt100 precision RTD temperature probe Basic type: 902721
The product is for monitoring all temperature measurement technology that is used for industrial applications, building technology, and quality assurance. It ensures that the measurement results can be traced back to the national standards.
  • Pt100 ceramic temperature sensor
  • Silicone-insulated connecting cable
  • Temp.: -200 to +450 °C
ATEX/IECEx RTD temperature probe - With connecting cable according to DIN EN 60751

ATEX/IECEx RTD temperature probe

With connecting cable according to DIN EN 60751 Basic type: 902821
Due to their specific features, ATEX/IECEx RTD temperature probes with connecting cables are used in pharmaceutical and chemical plants, power plants, pipes, on test rigs, in engine manufacturing, and at any measuring locations requiring flexibility and simple replacement.
  • Temp.: -100 to +600 °C
  • Temperature sensor: Pt100/Pt1000
  • Individual design types
Multipoint temperature probe - For temperature measurement in grain silos

Multipoint temperature probe

For temperature measurement in grain silos Basic type: 903530
The multipoint temperature probe reliably measures the temperature at different heights of a silo. The RTD temperature probe can be used for concrete and metal silos. Depending on the version, the multipoint temperature probe can be mounted outside or inside.
  • Measuring range: -5 to +80 °C
  • Analog or digital temperature sensor
  • ATEX approval zone 20 (dust)
JUMO HEATtemp - Screw-in RTD temperature probe for combined cold and heat meters for direct mounting (type DS/DL)

JUMO HEATtemp

Screw-in RTD temperature probe for combined cold and heat meters for direct mounting (type DS/DL) Basic type: 902455
Combined cold/heat meter RTD temperature probes are used for temperature measurement in closed pipeline systems. Direct mounting without an additional thermowell is recommended to achieve optimum thermal coupling to the measurement medium in the heating system.
  • Temp.: 0 to 120 °C (cold) / 180 °C (heat)
  • Temperature sensor: Pt100, Pt500, Pt1000
  • Insertion length: 25 to 60 mm / 60 to 210 mm
JUMO HEATtemp - Screw-in RTD temperature probes for heat meters with connecting cable for direct mounting (type DS/DL)

JUMO HEATtemp

Screw-in RTD temperature probes for heat meters with connecting cable for direct mounting (type DS/DL) Basic type: 902428
RTD temperature probes for heat meters are used for temperature measurement in closed pipeline systems. Direct mounting without additional immersion sleeve is recommended to achieve optimum thermal coupling to the measurement medium in the heating system.
  • Temp.: 0 to 180 °C
  • Sensor: Pt100, Pt500, or Pt1000
  • Insertion length: 25 to 60 mm/60 to 280 mm
Push-in RTD temperature probe - With connecting cable

Push-in RTD temperature probe

With connecting cable Basic type: 902150
Push-in RTD temperature probes are predominantly used for temperature measurement in liquid and gases. Application areas include the air-conditioning and refrigeration industry, laboratory technology as well as heating, furnace, and apparatus engineering.
  • Temp.: -50 to +400 °C
  • Sensor Pt100 or Pt1000
  • Optionally with bend protection
Surface RTD temperature probes - with connecting cable

Surface RTD temperature probes

with connecting cable Basic type: 902550
Surface RTD temperature probes are used in closed pipe systems or on other round and flat surfaces. The probes can be installed with ease using tightening bands or cable ties, which means that mechanical modification of the measuring location is not necessary.
  • Two-wire or three-wire circuit
  • Sensor Pt100, Pt500, or Pt1000
  • Temp.: -50 to +260 °C
JUMO HEATtemp - Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

JUMO HEATtemp

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL) Basic type: 902438
RTD temperature probes for heat meters are used for temperature measurement in closed pipeline systems. As the probes are installed in thermowells, emptying the system for regular replacement at the end of the certification period is no longer necessary.
  • Temp.: 0 to 180 °C
  • Sensor: Pt100, Pt500, or Pt1000
  • Insertion length: 45 to 85 mm / 85 to 450 mm
Screw-in RTD temperature probe - With connecting cable
H2 Signet

Screw-in RTD temperature probe

With connecting cable Basic type: 902050
Screw-in RTD temperature probes with connecting cable are used in such fields as air-conditioning and refrigeration technology, heating and furnace construction, and apparatus engineering.
  • Two-wire, three-wire, four-wire
  • Temp.: -50 to +400 °C
  • Pt100 temperature sensor
JUMO plastoSENS T01 - Voltage-resistant plastic temperature probe

JUMO plastoSENS T01

Voltage-resistant plastic temperature probe Basic type: 904001
This especially developed transformer probe can be used in electric motors or in other high-voltage environments. In contrast to metallic temperature probes, it is made of plastic and can therefore be installed in the insulation layer without any problems.
  • Temp.: -50 to +200 °C
  • Nominal voltage: up to AC 3500 V
  • SMD, NTC, PTC, or Pt sensor
JUMO plastoSENS T03 - Steam-tight plastic temperature probe

JUMO plastoSENS T03

Steam-tight plastic temperature probe Basic type: 904003
The JUMO plastoSENS T03 solves the problem of insufficient leak-tightness from conventional probes. Since the special plastics used in the injection molding process form an adhesive bond, it is completely sealed, even at the critical point of the cable outlet – ideal for sterilization applications.
  • SMD, NTC, PTC, or Pt sensor
  • Temp.: -50 to +200 °C
  • Protection type IP69K
JUMO plastoSENS T02 - Vibration-resistant plastic temperature probe

JUMO plastoSENS T02

Vibration-resistant plastic temperature probe Basic type: 904002
The sensor of the JUMO plastoSENS T is completely enclosed in plastic, which means that it offers extremely high vibration resistance. This eliminates the need for time-consuming positioning of conventional probes in harsh environmental conditions caused by moving components (e.g. motors of vehicles or machines).
  • Temp.: -50 to +200 °C
  • SMD, NTC, PTC, or Pt sensor
  • Heavy-duty plastic that can withstand high loads
JUMO plastoSENS T04 - Surface-optimized plastic temperature probe

JUMO plastoSENS T04

Surface-optimized plastic temperature probe Basic type: 904004
Compared with conventional pipe surface probes, the surface-optimized plastic temperature probe is completely adapted to the pipe diameter. As a result, it is ideal for acquiring the temperature in pipes with a small diameter, without causing flow changes.
  • Temp.: -40 to +180 °C
  • Sensor: Pt100 or Pt1000
  • Clip mounting

item items, maximum number of items reached