JUMO tecLine Ci-S - Inductive Conductivity and Temperature Sensor for General Process Technology (202942)

The sensor measures the electrolytic conductivity of a process liquid. The sensor uses the inductive principle of measurement. An integrated, fast-response (Pt1000) temperature probe measures the process temperature at the same time. The sensors in this data sheet add established variants in different engineering versions to the wide range of JUMO inductive conductivity sensors. The versions are made out of different materials (PVDF or PEEK) and have different sensor geometries. PEEK sensors with process connections /955 and /956 are installed in the process via process adapters (e.g. clamp, SMS, milk cone) using a sealing cone system. The extremely small design type also allows them to be used in small cross-section pipes. The PVDF versions have a larger sensor body and the choice of an exposed temperature sensor (in a stainless steel sleeve) or an internal temperature probe. The PVDF versions are used when it is not possible to use other measuring cell materials for chemical reasons. All the sensors are made from hygienically safe materials and have proven to be reliable in typical food and beverage industry cleaning processes (e.g. CIP). A wide range of process connections are available to ensure flexibility in systems and to provide spare equipment for older devices. An immersion version also allows use in open tanks and channels. Because the sensor measures inductively it is practically maintenance-free compared to the conductive measuring method. Deposits and grease/oil films on the surface of the sensor have virtually no effect on measuring accuracy. The JUMO tecLine Ci sensors are designed for connection to the JUMO AQUIS 500 Ci transmitter according to data sheet 202566.

Accessory articles