Latest press releases
-
Financial Year 2010 JUMO GmbH & Co. KG
Fulda, 10.03.2011In common with companies throughout the Electrical Engineering and Electronics Industry, JUMO has been very conscious of the upturn in the sector. Global turnover increased from 143 million euro to 170 million euro and is readjusted to the pre-crisis level of 2008. Compared to the 2009 financial year, this corresponds to an increase in the consolidated turnover of 18.9%.
-
JUMO Analytical Measurement extends the range of sensors for measuring the electrolytic conductivity of pure and ultra-pure water
Fulda, 08.02.2011The expansion of the successful JUMO tecLine Lf-VA series as per Data Sheet 202924 has seen the development of two new measuring cells (K = 0.1 and K = 0.01). Shortening the active measurement electrodes also allows them to be installed for smaller pipe diameters and lower sample volumes.
-
JUMO is awarded the Reliable Partner AEO Certificate
Fulda, 08.02.2011The Fulda based company JUMO has been awarded the AEO Certificate "Simplifications/Safety Under Customs Law (AEO F) by the Main Customs Office in Gießen to become an "Authorized Economic Operator". As such, JUMO is regarded as a particularly trustworthy and reliable supplier within the framework of the international merchandise trade.
-
New innovative frost protection thermostat
Fulda, 08.02.2011High protection class, latest connection technology as well as frost protection monitoring over a large surface area are the most prominent equipment features of JUMO's new frostTHERM-ATs. To prevent damage caused by frost, it monitors the temperature of the air flow entering the water-air heater in ventilation and air conditioning systems.
-
Compact pressure transmitters for the low pressure range
Fulda, 08.02.2011Precise in its measurements, steadfast in the face of the environment, unimpressed by time – the new MIDAS S06 from JUMO. Measuring pressure conditions in air intake and extraction systems, as well as filter monitoring or determining liquid levels in tanks and washers, needs equipment that measures as precisely as possible, is resistant to aggressive media, yet is also inexpensive.
-
Pressure transmitters for railway applications
Fulda, 08.02.2011Robustness and reliability even in the most adverse operating conditions, these are the strengths of the new MIDAS SR pressure transmitter from JUMO. Whether in braking equipment, compressed air generation, air conditioning, sanitary facilities, retarder control or for pantograph pressure – the application possibilities for railway engineering are many and varied.
-
JUMO MIDAS C08: basic OEM pressure transmitter
Fulda , 11.03.2010The new JUMO MIDAS C08 is the basic product of the MIDAS OEM pressure transmitter series. For numerous measurement tasks with high quality requirements, such as in machine and compressor construction, in industrial pneumatic uses and in commercial vehicles, it is the ideal partner – made in Germany.
-
JUMO TB/TW 08 The new temperature limiter and monitor to EN 14 597 for panel mounting
Fulda , 10.03.2010The new TB/TW 08 extends JUMO’s existing portfolio of instruments that can be used in the functional safety range to EN 14 597.
-
JUMO TYA-200 The new microprocessor-based thyristor power unit
Fulda , 09.03.2010The new JUMO power unit consists of two self-contained device versions: type TYA-201 for single-phase operation and type TYA-202 for three-phase operation in a three-phase economy circuit.
-
New compact transmitter / controller series for liquid analysis
Fulda, 08.03.2010The new instrument series is available in 4 variants: JUMO dTRANS pH 02 – pH-measurement with glass and ISFET sensors, redox measurement, NH3 measurement JUMO dTRANS CR 02 – conductivity measurement with conductive two-pole and four-pole sensors, resistance measurement in ultra-pure water JUMO dTRANS AS 02 – 0/4 - 20 mA signal input for sensors with a standard signal output, such as chlorine, chlorine dioxide, ozone and hydrogen peroxide sensors, level probes, pressure measuring instruments JUMO dTRANS Ci 02 – conductivity measurement with inductive sensors
-
Temperature sensors for cold meters
Fulda , 05.03.2010JUMO is presenting an extensive range of nationally approved temperature sensors to be used for cold measurement. These include the so-called “direct short” short temperature sensors to EN 1434 and the long temperature sensors for direct installation and for immersion sleeve application. There are special connecting cables and seals to ensure that the system remains tightly sealed and reliable, even after several thousand changes in temperature, that can fall below the dew point.
-
JUMO DELOS T Electronic temperature switch with display and analog output
Fulda, 04.03.2010The new JUMO DELOS T electronic temperature switch is a true multi-talent with switching contacts, analog output, and a brilliant LC display for the on-site display of current temperature values and switching contact states. Because high-grade stainless steels are used, the instrument is ideal for applications in areas where hygiene is a sensitive issue. Even at the development stage, process-oriented startup and device parameterization are a priority and have been implemented in a practically relevant way.
-
JUMO Wtrans B Programmable head transmitter with wireless transmission
Fulda, 03.03.2010JUMO is expanding its Wtrans system for sensor signal conditioning with the new programmable and cordless head transmitter with wireless transmission.
-
JUMO Wtrans Wireless temperature measuring system with ATEX approval and electronic modules up to 125°C
Fulda , 02.03.2010More versions have been added to the JUMO Wtrans temperature measuring system, taking into account diverse customer requests for products covering a wide variety of different areas of application. New to the product line is a transmitter with ATEX approval. Also new to the Wtrans family of products are transmitters containing a highly temperature-resistant electronics module, that can be used up to a temperature of 125°C .
-
Financial Year 2009 JUMO GmbH & Co. KG
Fulda, 01.03.2010In keeping with the entire Electrical Engineering and Electronics Industry, JUMO was also unable to escape the development of the global economic crisis this past year. Nevertheless, it was possible to minimize the effects of the crisis. Although JUMO had to accept a slump in sales this past year, they were able to come through the crisis successfully and to emerge strengthened, so that the company is now looking ahead to the 2010 financial year with confidence.
-
Impeller flow rate sensor with connector to EN 175 310 and frequency output
Fulda, 26.02.2010The JUMO 406020 flow rate sensor with impeller is suitable for neutral liquids, as well as weakly aggressive ones with low solid levels, in tubing with nominal widths from DN 15 to DN 400. Flow speeds from 0.3 to 10 m/s can be measured.
-
Magnetically inductive flow rate transmitter with frequency, current and relay outputs
Fulda, 25.02.2010The JUMO 406010 flow rate transmitter is suitable for conductive liquids in tubing with nominal widths from DN 15 to DN 400. Flow speeds from 0.2 to 10 m/s can be measured.
-
JUMO IMAGO F3000 Process, control and regulation unit with TFT display and new design
Fulda, 25.02.2010JUMO is presenting its new IMAGO F3000 process, control and regulation unit at IFFA 2010 in Frankfurt. The instrument features a brilliant new TFT display with backlit LED and a new instrument design.
-
External RTD temperature probe for the building systems industry
Fulda, 25.02.2010Temperature measurement – also with regard to energy efficiency – is becoming increasingly important in building services engineering. JUMO has extended its range of temperature probes for this industry by an outdoor RTD temperature probe.
-
Process immersion fitting with integrated circulating sensor rinsing
Fulda, 25.02.2010The new JUMO 202821 series process immersion fitting is used to securely install electrochemical sensors in tanks, reservoirs and open channels. It is specifically designed for use in harsh ambient conditions and is the preferred choice for use in heavily polluted media or media that form a coating. Integrated circulating sensor rinsing with a ring-shaped spray nozzle arrangement makes it easy to clean the sensor. It helps to increase the service life of the sensor and reduce expenditure on maintenance.
-
New flue gas temperature monitors (ATW) with DIN approval
Fulda, 25.02.2010The JUMO flue gas temperature monitor versions approved as per DIN EN 14597 can be used in virtually all areas of electro-mechanical temperature monitoring. They allow safe operation of heating systems while also assuming the most varied safety functions. They can, for instance, assist in controlling an extraction fan.
-
JUMO safety temperature limiters and monitors
Fulda, 25.02.2010The new safety temperature limiters (STB) and monitors (STW) from JUMO representing the latest state of the art meet technical and economical requirements in the field of functional safety and reliability.
